#MANUAL GPX VIEWER SERIAL NUMBER#

IMEI - International Mobile Equipment Identity: is a unique number that is used to identify 3GPP mobile phones.

#MANUAL GPX VIEWER SERIAL NUMBER#

ICCID - Integrated Circuit Card Identifier: a unique serial number that is stored on the SIM card.

GSM uses narrowband TDMA, which allows eight simultaneous calls on the same radio frequency.

GSM – Global System for Mobile Communications: one of the leading digital cellular systems.

GPRS – General Packet Radio Service: a standard for wireless communications which runs at speeds up to 115 kilobits per second.

GPS – Global Positioning System: a worldwide satellite navigational system formed by 24 satellites orbiting the earth and their corresponding receivers on the earth.

GNSS – Global Navigation Satellite System: a system with global coverage that uses satellites to provide autonomous geo-spatial positioning.

ESP - Electronic Stability Program: is a technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding).

COM port - serial communication interface that is used to transfer information to/from devices such as modems, terminals and various peripherals.

CNG - Compressed Natural Gas: methane stored at high pressure.

CAN - Controller Area Network: a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer.

APN - Access Point Name: the name of a gateway between 3GPP mobile network and Internet or another computer network.

AVL packet: Data packet which is being sent to the server during data transmission.

AVL - Automatic vehicle location: means for automatically determining and transmitting the geographic location of a vehicle.

AC/DC – Alternating Current/Direct Current.

The GPX data is displayed in the 3D Window and a group of layers/objects is created in the Project Tree.This section is a glossary of terms found in the FMB209 manual. § Image label objects for each of the track's waypointsĦ. If Tracks are selected for import, then for each track in the route the following are created: If Waypoints are selected for import, image label objects are created for each of the waypoints. If Routes are selected for import, then both of the above are created.Ĭreate streaming point shapefile layers with the route's waypoints under the application AppData.Ĭreate point shapefile layers with the route's waypoints under the application AppData. § A point shapefile with the waypoints of that track § A polyline object with the track's path

If Waypoints are selected for import, a feature layer is created for all the route's waypoints. All waypoints and route/track polyline are displayed directly on the terrain.

If you want to ignore the elevation values in the GPX file, select Relative to Terrain. § Routes – The route’s tracks and waypoints.Ĥ. § Tracks – The waypoints for each of the route's tracks. Select the check boxes of the data you want to import: On the Navigation tab, in the Navigation Aid group, click the arrow under GPS, and select GPX Reader. The GPX Reader reads GPX files and displays their waypoint and track data in the 3D Window, storing the GPX data in the project either as groups of point objects or as feature layers.ġ.

GPX is an XML schema designed as a common GPS data format to describe waypoints, tracks, and routes.

Manual gpx viewer